Back to Manufacture Equipment List

ADVANCED DRY CHARGE OVEN

FOR EFFICIENT PRODUCTION OF HIGH QUALITY PLATE
The Dry Charge Oven, Type VTDL32110, is specially designed for drying washed wet formed negative battery plates to give long term, high capacity, dry charge retention. The machine dries the moisture of battery plates under low oxygen environmental conditions thus reducing oxidation. The machine consists of electric control cabinet, oven body, compressed air pipeline, cooling water pipeline and combustible gas supporting pipeline.

SPECIFICATIONS

A. Technical data:

  1. Combustible gas (specified before deal): natural gas, 0.1MPa, 20NM3/h;
  2. Compressed air: 0.6MPa, inlet pipe dia. 1/2;
  3. Cooling water: 0.2Mpa, inlet pipe dia. 1;
  4. Electric power: 22KW, 3 phase, 380V;
  5. Weight: 2500Kg,(main machine 2000kg, electric control cabinet: 500kg)
  6. Size :Main machine 2700L2700W2300H,Electric control cabinet: 900L460W1920H
  7. Working parameters
  8. Oven temperature: 80~90, (Max. 110)
  9. Oxygen content of drying atmosphere inside oven: less than 5% while temperature rising; less than 2% while holding temperature
  10. PbO content of dried plates: less than 6%(weight)
  11. Volume of oven hearth: 1530L990W630H

B. Range of supply in sets:

  1. Main machine
  2. Loading frame and water tank
  3. Electric control cabinet for main machine

 

 
Copyright Nanjing VOLT Technology Co., Ltd 2000
Contact: webmaster@voltbattery.com
Addr: PO Box 1631, Nanjing 210016, CHINA +86 25 4804190; 4840118; 4828479/FAX